Serving Carrollton and nearby communities
Valwood Industrial Park buildings from 1981 send forklifts off dock-high doors and into rack aisles all shift. We size the coating and topcoat to those lanes.
Your local coating team
Forty-plus years of pallet jacks leave marks. Carrollton's Valwood Industrial Park holds buildings like the 131,840-square-foot warehouse on Champion Circle, built in 1981 with 21 dock-high doors. On a slab that age we expect worn sealer, spalled joints near the dock edge and oil tracked in from trailers. Each of those adds prep before a coating can bond, so they are the first things we look for on the walk. A coating laid over any of them peels in the same lanes it was meant to protect.
Dock-high distribution puts wear in predictable lanes. A forklift comes off the dock plate, turns, and runs the same path to the rack aisles hundreds of times a week. That pattern is why a Carrollton warehouse gets epoxy under a thicker, traffic-rated topcoat instead of a residential build, and why aisle and dock-lane striping comes up in most of these conversations.
Floor size sets the calendar. A warehouse past 100,000 square feet runs across several working days, usually in sections, and the cost of returning between coats matters on a job that long. From our Garland shop the President George Bush Turnpike gets a crew to Carrollton in about 34 minutes, which keeps those return trips short and stops a two-week schedule from becoming three.
Explore more
Carrollton, TX
Everything we offer in Carrollton — services, local expertise, FAQs, and pricing.
View the Carrollton page
UV-stable, slip-conscious coatings that refresh patios and outdoor concrete. We tailor the recommendation for Carrollton properties.
Carrollton patio floor coatings
One-day flake garage floors that resist hot tires, oil, and stains. We tailor the recommendation for Carrollton properties.
Carrollton garage floor coatings
Protective coating systems for driveways, walkways, pool decks, and more. We tailor the recommendation for Carrollton properties.
Carrollton concrete coatingsSeamless, easy-to-clean epoxy floors for garages and workspaces. We tailor the recommendation for Carrollton properties.
Carrollton epoxy flooringBuilt around local conditions
A Hill N Dale house on Sherwood Lane dates to 1970, and a large share of the city's housing went up in the 20 years that followed. Garage slabs past 50 years often carry oil stains, cracks and old patches. They get the most grinding and filling of any floor we see before the polyurea base coat goes down.
Josey Ranch, also on the Dallas County side, includes homes from 1986 with two-car garages, and its HOA is voluntary. Those floors are about 40 years old now. When an owner has kept up the rest of the house for decades, the bare garage is often the last unfinished room, and that is the most common reason people call us.
North of the Dallas County line, Villages of Indian Creek dates to about 1991, Estates of Indian Creek to 2009 and Mustang Park to 2017. These are Lewisville ISD streets near Hebron High School, with larger houses and some three-car garages. Younger slabs need less filling, so prep there is mostly grinding the surface open.
Carrollton's industrial side includes Valwood Industrial Park, where a 131,840-square-foot warehouse at 1270 Champion Circle dates to 1981. Floors like that get commercial epoxy or urethane cement. Across the region, homes and warehouses alike sit on Blackland Prairie Houston Black clay, a high shrink-swell soil, so slabs here can move with the seasons.
Reliable local support
Carrollton is about 34 minutes from our Garland shop outside rush hour. Daytime traffic takes longer. We confirm your address and current appointment options rather than promising an unverified arrival or lead time.
Nick sees your Carrollton concrete in person. Size, age, stains, existing coatings and daily use shape the recommendation, and your written quote explains the preparation needed.
Qualifying residential flake systems include a 15-year written warranty. Ask Nick to explain coverage and exclusions for the specific surfaces on your quote; do not assume every outdoor or commercial system carries the same terms.
Nick’s Garland-based company handles your estimate, installation planning and project questions. Discuss all the areas you want evaluated at the same free visit, with clear recommendations and no pressure to buy.
Service coverage
Our Garland-based team also serves these nearby DFW communities — bringing the same one-day installation standard to homes and businesses around Carrollton.
Questions? Call us
214-550-9809Nearby service areas
Helpful local answers
A Carrollton commercial floor coating is quoted as one written figure after a walk through the building, because square footage, joint repair and old-coating removal vary too much to price blind. A 1981 dock- high warehouse usually needs more repair along the dock edges than a newer slab, and that shows up as its own line in the scope. We do not bill by the hour. Dial (214) 550-9809 to put your Carrollton floor on the walk calendar.
Usually yes, though it is settled building by building at the Carrollton site walk. Coating only the open aisles costs less and keeps racks loaded, while coating under emptied bays gives one continuous floor. In Valwood-area buildings with long rack rows, we look at how much forklift traffic runs between the uprights before recommending either. The choice is written into your commercial scope. Racking questions go straight to (214) 550-9809.
Most Carrollton warehouse floors over 100,000 square feet take several working days, coated section by section so part of the building can keep operating. Prep takes the most time on older slabs, since spalled joints and worn sealer come first. Cure time before forklift traffic depends on the commercial system, and your written scope lists when each section reopens. Ask about your schedule at (214) 550-9809.
Yes. Commercial floor coating jobs in Carrollton run from our Garland shop, about 21 miles and roughly 34 minutes away by way of the Bush Turnpike in afternoon traffic. The Valwood Industrial Park area around Champion Circle sits inside that run, along with Carrollton addresses in Dallas, Denton and Collin counties. There is no separate Carrollton office, so the same crew handles every visit. Carrollton dates are booked through (214) 550-9809.
A 1980s Carrollton warehouse slab usually needs joint repair, crack filling and removal of worn sealer before a commercial coating will bond. Decades of forklift traffic open the joints nearest the dock doors first, and oil from trailers soaks into the surface there. We grind the floor open, fill and repair, then clean out what is left. How much of that prep your slab needs is the biggest variable in the price. Phone (214) 550-9809 for an assessment.
Gather three things before a Carrollton commercial floor walk: the square footage of each area, a rough map of forklift routes from the dock doors, and a list of doors or zones that cannot close. Mention any past coating or sealer, since removing it changes the prep. If a landlord owns the building, find out who signs off on the work. Email them ahead, or read them to our Garland office at (214) 550-9809.
Striping belongs in many Carrollton commercial floor coating scopes, applied after the topcoat so the lines sit on a finished surface. Aisle lines, dock-lane edges and pedestrian walkways are the usual requests in dock-high buildings. Bring your current layout or a sketch to the walk, and we will price the lines as their own item in the written number. Ask about striping at (214) 550-9809.
Send the square footage and dock count, and we will walk the building and write one number.