Serving Garland and nearby communities
Many southwest Garland plants sit on slabs poured years apart, like a 1963 building on W Kingsley Rd expanded in 1974, so our epoxy plan starts at the seam.
Your local coating team
Garland counts more than 300 manufacturers, and many of the older plants in the southwest part of the city were built in stages. One rail-served plant on W Kingsley Rd went up in 1963 and gained an addition in 1974, so a single floor holds two pours of different ages. Decades of plant use leave oil, worn traffic lanes and patched sections behind. Before any epoxy is priced, we look at where one pour meets the other and how each side has held up.
Assembly floors, storage bays and aisles in a building like that are where epoxy with a heavier topcoat earns its keep. It is a poor match for hot process lines or for areas hosed down with hot water through the shift. In those zones we would switch to urethane cement and keep the epoxy for the rest of the plant. Drawing the line between the two systems happens on the site walk, with your plant manager pointing out where heat and water actually reach the floor.
Garland City Hall is roughly a 7-minute drive from the Classic shop on N Shiloh Rd. An epoxy build that runs over several days, with a primer, a body coat and a topcoat, means repeat trips to the same floor. From this close, those trips add almost nothing to your price, and a crew can come back for a second look without anyone billing a half day of driving.
Explore more
Garland, TX
Everything we offer in Garland — services, local expertise, FAQs, and pricing.
View the Garland page
UV-stable, slip-conscious coatings that refresh patios and outdoor concrete. We tailor the recommendation for Garland properties.
Garland patio floor coatings
One-day flake garage floors that resist hot tires, oil, and stains. We tailor the recommendation for Garland properties.
Garland garage floor coatings
Protective coating systems for driveways, walkways, pool decks, and more. We tailor the recommendation for Garland properties.
Garland concrete coatings
Durable floors for shops, showrooms, warehouses, and work areas. We tailor the recommendation for Garland properties.
Garland commercial floor coatingsBuilt around local conditions
The 1970s is Garland's biggest decade for housing: more than a quarter of today's homes went up then, and the median home was built in 1978. A slab that age has had nearly fifty years to collect oil, hairline cracks and patchy old paint or sealer. The crew grinds that surface open and works the cracks and stains into the prep before any base coat goes down.
According to the Dallas County soil survey, the Houston Black-Heiden soils carry very high shrink-swell potential. Clay like that runs across this part of North Texas, and slabs on it rise and settle as the ground wets and dries. That is why cracks appear in garages nobody abused. Nick describes the polyurea base as four times more flexible than epoxy. No coating stops a slab from moving.
Garland's own flood protection presentation names Duck Creek as the basin with most of the city's flooding issues, and building along it dates to the 1950s and 1960s. If your garage has ever taken on water, mention it when you book. Water lines, lifted paint and damp corners change the prep plan, and Nick would rather see them at the estimate than on install day.
Near Lake Ray Hubbard, Eastern Hills Estates and Lakeside Meadows Estates include older houses with pools and garages that face the side or the rear. North Garland is different: Firewheel Estates and The Greens hold larger, newer houses. The owners who call us usually want the same result at either end of town, a garage floor that looks as finished as the rest of the house.
Reliable local support
Garland is about 7 minutes from our Garland shop outside rush hour. Daytime traffic takes longer. We confirm your address and current appointment options rather than promising an unverified arrival or lead time.
Nick sees your Garland concrete in person. Size, age, stains, existing coatings and daily use shape the recommendation, and your written quote explains the preparation needed.
Qualifying residential flake systems include a 15-year written warranty. Ask Nick to explain coverage and exclusions for the specific surfaces on your quote; do not assume every outdoor or commercial system carries the same terms.
Nick’s Garland-based company handles your estimate, installation planning and project questions. Discuss all the areas you want evaluated at the same free visit, with clear recommendations and no pressure to buy.
Service coverage
Our Garland-based team also serves these nearby DFW communities — bringing the same one-day installation standard to homes and businesses around Garland.
Questions? Call us
214-550-9809Helpful local answers
Yes, epoxy can go over an old Garland plant floor once the slab has been prepared and repaired. Age matters less than condition: oil soaked into the concrete, a failing old coating and broken edges at a seam all have to be handled first, because epoxy holds only as well as the surface under it. We check each section at the site walk and price what we find. Call (214) 550-9809 to set one up.
Square footage and slab condition drive the price of a Garland epoxy floor, and you receive the figure on paper once we have walked the floor. On older plants the prep is usually the biggest variable: stripping old coatings, repairing worn lanes and treating the joint where an addition meets the first pour. The topcoat, slip texture and striping add to it, while travel from our nearby shop adds next to nothing. Ask for a quote at (214) 550-9809.
That depends on square footage, repairs and cure time, and your written schedule states it section by section before any Garland work begins. Because the shop is in Garland, the epoxy coats can be spread across separate days without adding travel cost, which makes it practical to close one part of a large floor while the rest keeps running. Call (214) 550-9809 to plan the sections with us.
Garland is home base for our epoxy crews, with the shop at 106 N Shiloh Rd, a 7-minute drive from City Hall. We cover the southwest industrial streets around W Kingsley Rd, the I-635 edge and every other part of the city, including the slices of the city inside Collin and Rockwall counties. Site walks are booked during office hours, weekdays 8 to 5 and Saturday mornings. Call (214) 550-9809 to book one.
Know which areas run hot or get washed down, because in a Garland plant those zones usually need a system other than epoxy. It also helps to know where the building was added onto, since the joint between pours gets its own prep. Bring a rough square footage and a sense of which sections can close at the same time. With that, the walk goes quickly and the quote is accurate. Call (214) 550-9809.
Hot process lines and areas washed down with hot water are where a Garland plant should skip epoxy. Those zones are better served by urethane cement, which we would mark off at the site walk. Assembly floors, storage bays and aisles are where epoxy with a heavier topcoat fits well, and one building can carry both systems on a single quote. Ask about the split at (214) 550-9809.
For a home garage we recommend our polyurea flake floor rather than epoxy. Many Garland houses date from the 1960s and 1970s, and those slabs get ground, crack-prepped and coated with a polyurea base that Nick rates at roughly four times the flexibility of epoxy, then color flake and a clear polyaspartic finish coat. Most installs take one day. Our Garland garage floor coatings page has the details, or call (214) 550-9809.
Send the square footage, and we will walk both pours with you from a shop just minutes away.