Serving Fort Worth and nearby communities
North Fort Worth distribution runs from AllianceTexas cross-docks past a million square feet to a 2001 rail-served building on Railhead Road. We size the job first, then the coating.
Your local coating team
Scale decides a north Fort Worth job before the product does. One AllianceTexas cross- dock, finished in 2023 with 40-foot clear height, covers 1.18 million square feet. That is far larger than the sectioned interiors we normally quote, so the first question at a walk is which zones need a coating at all. The second is whether that portion fits our crews. Often the honest scope is a run of dock lanes, an office front or one production area.
Older north-side distribution reads differently. The building at 401-441 Railhead Road went up in 2001 with 305,255 square feet, 28-foot clear, 21 exterior dock doors, one drive-in bay and an active rail spur. A slab with 25 years of dock traffic tends to show worn paths at the doors, opened joints and tired sealer. Those three items set the prep lines on the scope.
Inside either building, zones ask for different systems. Truck docks and the drive-in bay carry turning loads and tracked-in grit, which points to epoxy under a heavier topcoat. Heat or washdown areas lean toward urethane cement, and some open storage only needs sealed concrete.
With light traffic, Fort Worth City Hall and the Heritage community each read about 50 minutes from our Garland shop. Daytime runs take longer, so multi-visit Fort Worth floors are booked as consecutive days on site.
Explore more
Fort Worth, TX
Everything we offer in Fort Worth — services, local expertise, FAQs, and pricing.
View the Fort Worth page
UV-stable, slip-conscious coatings that refresh patios and outdoor concrete. We tailor the recommendation for Fort Worth properties.
Fort Worth patio floor coatings
One-day flake garage floors that resist hot tires, oil, and stains. We tailor the recommendation for Fort Worth properties.
Fort Worth garage floor coatings
Protective coating systems for driveways, walkways, pool decks, and more. We tailor the recommendation for Fort Worth properties.
Fort Worth concrete coatingsSeamless, easy-to-clean epoxy floors for garages and workspaces. We tailor the recommendation for Fort Worth properties.
Fort Worth epoxy flooringBuilt around local conditions
The median Fort Worth home was built in 1994, and the 2000s added more houses than any other decade. Heritage belongs to that wave. Park Glen is older, started in the late 1980s, so its oldest slabs have carried cars for close to forty years. Older concrete usually means more grinding, stain work and crack filling. Nick prices the appropriate preparation on your written quote.
Tanglewood’s first rules called for brick or stone and at least a two-car attached garage, and Overton Park carries similar deed restrictions. These ranch homes often have decades-old attached garages. We help select a flake blend to complement the brick. If a deed restriction or association reviews visible changes, ask for product and color details; approval remains with the association.
The National Weather Service logged a DFW low of minus 2 degrees in February 2021, with 139 straight hours at or below freezing. Summers swing the other way. A garage floor here needs appropriate preparation and a topcoat chosen for heat and sun exposure. Visible cracks are evaluated and suitable repairs are included before coating.
From Garland, north Fort Worth reads about 50 minutes with light traffic and Tanglewood about 57. Mira Vista lies farther southwest and is a gated community. Tell us about your exact location and any access restrictions when discussing the estimate. Nick calls before coming to your home, and appointment timing is confirmed for your project.
Reliable local support
Fort Worth is about 50 minutes from our Garland shop outside rush hour. Daytime traffic takes longer. We confirm your address and current appointment options rather than promising an unverified arrival or lead time.
Nick sees your Fort Worth concrete in person. Size, age, stains, existing coatings and daily use shape the recommendation, and your written quote explains the preparation needed.
Qualifying residential flake systems include a 15-year written warranty. Ask Nick to explain coverage and exclusions for the specific surfaces on your quote; do not assume every outdoor or commercial system carries the same terms.
Nick’s Garland-based company handles your estimate, installation planning and project questions. Discuss all the areas you want evaluated at the same free visit, with clear recommendations and no pressure to buy.
Service coverage
Our Garland-based team also serves these nearby DFW communities — bringing the same one-day installation standard to homes and businesses around Fort Worth.
Questions? Call us
214-550-9809Nearby service areas
Helpful local answers
Yes, and on the largest north Fort Worth buildings a partial commercial floor coating is usually the realistic scope. An AllianceTexas cross-dock can top a million square feet, so we may quote the dock lanes, an office front or one production area and leave the rest to a larger contractor. Each portion is priced on its own footage and dated on its own schedule. Tell us which zones matter most at (214) 550-9809.
Farther than the map suggests, so plan for it. Fort Worth City Hall and the Heritage community each read about 50 minutes with light traffic, and daytime trips take longer. Railhead Road and AllianceTexas sit in north Fort Worth, and we have not timed those runs separately. Commercial floor coating visits come from our Garland shop, since we keep no Fort Worth office or crew. Check open booking windows at (214) 550-9809.
Usually the zones that take the hardest traffic, not the whole Fort Worth floor. Dock lanes and drive-in bays see turning trucks and forklifts, office fronts see foot traffic and spills, and open storage sometimes needs only a sealer. We mark each zone during the commercial floor coating walk and recommend a system for it. Bring a floor plan if you have one, or call (214) 550-9809 to talk it through first.
Footage per zone sets most of a Fort Worth commercial floor coating price, followed by slab repair and the system chosen. A 2001 dock-high floor often needs joint work and sealer removal near the doors, and those are written as separate lines so you can see them. Any travel charge for the drive is still being confirmed. You get one written figure after the walk, never a range. Book that walk at (214) 550-9809.
Several working days per zone is a fair starting point for a Fort Worth distribution floor, though the real figure comes from the walk. Footage, joint repair and the system all change it, and a dock lane with heavy wear takes longer than open storage. Because the commercial floor coating crew drives in from Garland, Fort Worth days are booked back to back. Ask for a draft timeline at (214) 550-9809.
Fort Worth facility managers save time by having zone footage, a dock schedule and any sealer or coating history ready before the commercial floor coating walk. Mark which doors, including rail doors, can never close at the same time. If the building is leased, confirm who signs off on floor work. With those in hand, we can draft the zone plan on site. Send the details ahead, or read them to us at (214) 550- 9809.
Commercial warranty terms are still being finalized, and they will be written into your Fort Worth scope before any work begins. Questions about a commercial floor coating after handover go to the Garland office that walked and priced the job, not to a call center or a subcontractor. Because the drive is about 50 minutes off-peak, follow-up visits are scheduled ahead rather than same day. Reach that office at (214) 550-9809.
Send the address and rough footage, and we will say plainly which part we can take on.