Serving St. Paul and nearby communities
One 2006 St. Paul home on 5.45 acres comes with a 1,152-square-foot workshop and a metal building, and floors like those raise the epoxy question.
Your local coating team
Two St. Paul listings show the kind of floors that prompt an epoxy search here. A 2006 home on Westshore Dr sits on 5.45 acres with a 1,152-square-foot workshop and a separate metal building. A 1983 Lakeview Manors home on Lakeview Dr has an oversized pull-through garage, two carports and a two-story barn. Those are single listings, not a picture of the whole town, but they show how one St. Paul property can hold three or four different slabs.
A home workshop is still a residential slab. Our concrete coatings line, not commercial epoxy, is where it gets priced, in a shop finish such as quartz, stone-look or clear, plus chemical-resistant and slipresistant options around benches and tool areas. The garage on the same lot gets the polyurea flake system Nick chose for houses.
A metal building may have been sealed, painted or left bare for years, and Nick checks which before pricing, because an old finish has to come off first. The 1983 floors have had four decades on North Texas clay, so expect more crack filling and grinding there than on a 2006 slab.
Homes inside St. Paul's town limits take Wylie, TX 75098 mail, and nearby addresses outside town use the St. Paul name, so our scheduler checks the street address when you call. Our evening-rush test drive from Garland to Town Hall on Butscher's Block took about 34 minutes.
Explore more
St. Paul, TX
Everything we offer in St. Paul — services, local expertise, FAQs, and pricing.
View the St. Paul page
UV-stable, slip-conscious coatings that refresh patios and outdoor concrete. We tailor the recommendation for St. Paul properties.
St. Paul patio floor coatings
One-day flake garage floors that resist hot tires, oil, and stains. We tailor the recommendation for St. Paul properties.
St. Paul garage floor coatings
Protective coating systems for driveways, walkways, pool decks, and more. We tailor the recommendation for St. Paul properties.
St. Paul concrete coatingsDurable floors for shops, showrooms, warehouses, and work areas. We tailor the recommendation for St. Paul properties.
St. Paul commercial floor coatingsBuilt around local conditions
Listings in town show lots of 1.04, 1.63, 2.72 and 5.45 acres. The largest came with a 1,152-square-foot workshop and a separate metal building; one in Lakeview Manors had a two-story barn. Each building is measured on its own, and Nick checks whether a slab was ever painted or sealed, because an old finish has to come off first.
The homes we looked at were built in 1983, 1993, 2005 and 2006. A Lakeview Manors slab from the early 1980s has had four decades on North Texas clay, so expect more crack filling and grinding than on a 2005 Vista Oaks garage. Both end up with the same polyurea system, but the older floor takes longer to prep.
Lakeview Manors listings show an oversized pull-through garage with two carports, and another house with four. Carport slabs sit open to the weather, so they need an outdoor-rated topcoat instead of an indoor finish. Ask Nick whether yours is a good candidate.
Homes inside St. Paul's town limits get their mail as Wylie, TX 75098, and plenty of nearby addresses outside the town use the name St. Paul. We schedule by street address, so give us yours. Parker Road (FM 2514), St. Paul Road and Westshore Drive are all routine drives from TX-78.
Reliable local support
St. Paul is about 34 minutes from our Garland shop outside rush hour. Daytime traffic takes longer. We confirm your address and current appointment options rather than promising an unverified arrival or lead time.
Nick sees your St. Paul concrete in person. Size, age, stains, existing coatings and daily use shape the recommendation, and your written quote explains the preparation needed.
Qualifying residential flake systems include a 15-year written warranty. Ask Nick to explain coverage and exclusions for the specific surfaces on your quote; do not assume every outdoor or commercial system carries the same terms.
Nick's Garland-based company handles your estimate, installation planning and project questions. Discuss all the areas you want evaluated at the same free visit, with clear recommendations and no pressure to buy.
Service coverage
Our Garland-based team also serves these nearby DFW communities — bringing the same one-day installation standard to homes and businesses around St. Paul.
Questions? Call us
214-550-9809Helpful local answers
In most cases, no. A home workshop in St. Paul, even a 1,152-square-foot one, is a residential slab, so it gets a shop finish from our concrete coatings line rather than commercial epoxy. Quartz, stone-look and clear finishes are available, with chemical-resistant and slip-resistant options near benches and tool areas. If the shop runs a business, mention that and Nick compares both. Call (214) 550-9809.
Yes. A pull-through garage in St. Paul, like the oversized one listed at a 1983 Lakeview Manors home, gets the same polyurea flake system as any house garage, not epoxy. It simply carries more square footage, and doors at both ends change where the crew sets up. A slab that old usually needs more crack fill. Nick measures it end to end. Call (214) 550-9809.
Each St. Paul building gets its own line on one written price after Nick's free visit, the workshop in a shop finish and the garage in polyurea, with no epoxy rate for homes. Square footage leads, then slab age, cracks and any old sealer or paint. A 1983 floor usually needs more prep than a 2006 one. No rates are published, so the visit is where you get real figures. Call (214) 550-9809.
One St. Paul garage on its own is normally a one-day job, while a property with a workshop, a metal building and a garage takes longer, and Nick puts the schedule in writing. Older slabs that need extra grinding add time too. Each floor then needs its own wait before feet, stored items and cars return. Choosing epoxy would not shorten this, since we keep it for commercial work. Call (214) 550-9809.
Yes. Google Maps put Town Hall on Butscher's Block 14.9 miles and about 34 minutes away in evening rush, by TX-78. Homes inside town limits get Wylie, TX 75098 mail, and some addresses outside town use the St. Paul name, so we confirm the street before booking. Lakeview Manors, Vista Oaks and the Westshore Dr acreage are all covered, whether the question is a garage, a shop or epoxy. Call (214) 550-9809.
List every building you want coated and roughly how large each is, and note the year each was built if you know it. Tell Nick whether a workshop or metal building floor was ever sealed or painted, since an old finish comes off first. Expect a shop finish for the workshop and polyurea for the garage, not epoxy, with the reasons shown on your St. Paul slabs. Call (214) 550-9809.
Tell Nick which buildings you have, and he will price each slab on one visit.