Serving Forney and nearby communities
Gateway warehouses in Forney run past 600,000 square feet, yet the epoxy inside them belongs in the break rooms and support spaces being built out, not across the main slab.
Your local coating team
Forney's largest floors are in Gateway, the industrial district south of US 80. State construction filings list a 1.2-million-square-foot build-to-suit tilt-wall distribution facility at US 80 and Gateway Boulevard, with shell and tenant improvements between 2019 and 2020, and a 621,874-square-foot tilt-wall warehouse on South Gateway Boulevard finished in early 2022. The Forney EDC counts more than 500 acres of planned industrial land in the area.
Buildings like these keep changing on the inside after the shell is done. In 2022 the South Gateway warehouse took a 3,220-square-foot office build-out. A building on Sage Hill Parkway is adding a 4,289-square-foot office and break room, along with warehouse improvements, between February and June 2026. Each project adds rooms with floors of their own, small against the building around them.
Those rooms are where epoxy earns its place at this scale. A break room or support space takes spilled drinks, mop water and steady foot traffic, and a sealed epoxy floor under a heavier topcoat wipes clean. The main warehouse slab is a separate decision, driven by racking, forklifts and sheer area, and we do not assume it should carry the same system.
From our Garland shop it is 19.6 miles to Forney City Hall on Pinson Road, roughly 25 minutes by US-80 when traffic is light, and weekday peaks add to that. Most of our work is in Dallas, Collin, Denton and Rockwall counties, so a Forney job is booked as a planned trip rather than squeezed between nearby calls.
Explore more
Forney, TX
Everything we offer in Forney — services, local expertise, FAQs, and pricing.
View the Forney page
UV-stable, slip-conscious coatings that refresh patios and outdoor concrete. We tailor the recommendation for Forney properties.
Forney patio floor coatings
One-day flake garage floors that resist hot tires, oil, and stains. We tailor the recommendation for Forney properties.
Forney garage floor coatings
Protective coating systems for driveways, walkways, pool decks, and more. We tailor the recommendation for Forney properties.
Forney concrete coatings
Durable floors for shops, showrooms, warehouses, and work areas. We tailor the recommendation for Forney properties.
Forney commercial floor coatingsBuilt around local conditions
About 76 percent of Forney homes went up in 2000 or later, and Overland Grove only opened its new models in May 2026. Fresh concrete commonly shows hairline shrinkage cracks, and a garage that has held cars through a few summers picks up hot-tire marks and oil. Crack and stain prep is part of the coating job, after grinding. On a new house we ask when the slab was poured.
Fox Hollow homes by Bloomfield start at 3,479 square feet. One Diamond Creek house built in 2021 lists a 608-square-foot garage, and a 2021 Grayhawk listing sits on about a sixth of an acre. Square footage moves a quote more than anything else here, so Nick measures every bay and writes a separate line for each patio or porch you add.
The Legislature named Forney the Antique Capital of Texas in 1987. A few blocks off Main Street, the Texas Historical Commission has marked the 1886 McKellar House and 1898 Brooks House on South Center Street and the 1910 Moore House on South Bois d'Arc. Garages and patios behind houses this old may date from any later decade, so Nick checks each slab's surface and age before he quotes it.
The Texas State Historical Association describes Kaufman County as Blackland Prairie with clayey subsoils on level to gently undulating ground. Blackland clay is known across North Texas for moving as it wets and dries, which can show up as hairline cracks in a slab. Our prep fills those cracks first. The polyurea base that goes over them is, in Nick's words, four times more flexible than epoxy.
Reliable local support
Forney is about 25 minutes from our Garland shop with light traffic. Daytime traffic takes longer, so Forney estimates and installs are set times on the calendar, not same-day squeezes.
A Forney-area address can belong to a neighboring community or unincorporated county land. Nick confirms the property from your street, so your quote and warranty paperwork name the right place.
A residential floor carries our 15-year written warranty, issued by the company whose own in-house installers put it down. If something needs a look, you call the Garland office and that same crew drives back out.
Most of our work is in four other counties, and you should hear that from us first. A Forney garage still gets the same in-house crew and polyurea system as one in Garland.
Service coverage
Our Garland-based team also serves these nearby DFW communities — bringing the same one-day installation standard to homes and businesses around Forney.
Questions? Call us
214-550-9809Helpful local answers
Yes, a break room is one of the best fits for epoxy inside a Forney distribution building. The floor takes spills, mop water and heavy foot traffic in a small area, and a sealed epoxy surface with a heavier topcoat cleans quickly and resists staining. Slip texture goes near sinks and doors. Rooms like this are what we expect to quote in Gateway. Talk through your room list at (214) 550-9809.
A Forney build-out gets one written price once Nick has walked it at no charge, covering every room you want in epoxy. The combined square footage of those rooms matters most, then slab condition, crack repair, removing any old sealer, the topcoat and slip texture. The size of the warehouse around them does not set the number. Ask for the walk at (214) 550-9809.
Gateway's main slabs in Forney run from hundreds of thousands to more than a million square feet, and a floor that size under racking and forklifts is its own decision, separate from a break room epoxy job. If you manage one, phone (214) 550-9809 for a plain answer on whether it suits us.
A single Forney break room can often be prepped and coated quickly, but it stays closed until the epoxy cures, and that time is written into your schedule before work starts. A newly poured room may also need to wait before coating. When several rooms are in scope, they can be sequenced so staff always have one open for breaks. Ask about dates at (214) 550-9809.
Yes, Forney is inside our epoxy flooring area, planned as a Kaufman County trip. Our Garland shop sits 19.6 miles from the Pinson Road city offices, roughly 25 minutes by US-80 in light traffic, and weekday peaks stretch it. Gateway lies south of US 80 inside city limits, and Mustang Creek Business Park is in the city as well. Some Forney addresses sit outside the city, so we confirm by street. Phone (214) 550-9809 to book a walk.
Bring the build-out plan, because a Forney epoxy scope starts by marking which rooms get it and where the warehouse slab takes over. Know whether each room's floor is newly poured or existing, and roughly when any new concrete went in. List the appliances, sinks and doors in each room, plus the dates other trades are on site. Email them ahead of the walk, or read them to Nick at (214) 550-9809.
Polyurea. Forney houses get our polyurea flake system in the garage, and epoxy is kept for business rooms like the ones in Gateway. Nick describes polyurea as far more flexible than epoxy, about four times by his figure, and its polyaspartic topcoat does not yellow when the door is up. About three in four Forney homes were built in 2000 or later, so most floors are builder slabs. See the Forney garage page, or call Nick at (214) 550-9809.
One free walk marks every room on the plan, and the written scope shows exactly where the epoxy ends.