Serving Corinth and nearby communities
Corinth's biggest new floor is a 146,680 sq ft office/warehouse on N Corinth St, and its epoxy works best down before the first racking anchor is drilled.
Your local coating team
The largest new floor in Corinth sits at 1116 N Corinth St: a 146,680 sq ft office/warehouse with tilt-up concrete walls and a steel roof, scheduled from June 2025 to May 2026. A first-generation building like that hands its owner or first tenant a clean, open slab with no racking, no machinery and no old coating. For epoxy, that empty floor is the best condition the building will ever be in.
Epoxy under a heavier topcoat suits the warehouse side, where pallet jacks and forklifts run all day. Racking is the catch. Upright anchors are drilled into the slab, and drilling through a finished coating cuts it at every base plate. Coating first and racking second keeps the film whole between anchors. The office side keeps whatever flooring its build-out specifies, so the epoxy line usually follows the warehouse wall.
A building finished in spring 2026 may be ready for coating before its racking crew arrives, but only once the new slab has cured long enough. We check that before a date is held.
From Garland, the late-night reading to City Hall on Corinth Pkwy came to 34.9 miles and roughly 37 minutes over I-635 and the I-35E Express lanes. A warehouse share of 146,680 sq ft is a multi-day job, so that drive repeats each install day and is planned into the schedule.
Explore more
Corinth, TX
Everything we offer in Corinth — services, local expertise, FAQs, and pricing.
View the Corinth page
UV-stable, slip-conscious coatings that refresh patios and outdoor concrete. We tailor the recommendation for Corinth properties.
Corinth patio floor coatings
One-day flake garage floors that resist hot tires, oil, and stains. We tailor the recommendation for Corinth properties.
Corinth garage floor coatings
Protective coating systems for driveways, walkways, pool decks, and more. We tailor the recommendation for Corinth properties.
Corinth concrete coatings
Durable floors for shops, showrooms, warehouses, and work areas. We tailor the recommendation for Corinth properties.
Corinth commercial floor coatingsBuilt around local conditions
Oakmont Estates 2 dates from 1986, Woods at Oakmont from 1997 and Windsor Ridge at Oakmont from 1999. Lake Sharon Estates followed in 2005 and Provence in 2012, and Meritage opened its 400-home Ashford Park in 2021. One real estate data service puts 58 percent of Corinth homes in the 1970-1999 range. That spread is why Nick inspects each slab before pricing it.
A garage poured in 1986 has carried close to 40 years of tires, oil drips and stored gear. Before the polyurea base goes down, the crew grinds the surface and fills cracks and holes. That step takes longer on an Oakmont-era slab than on a 2012 Provence garage, and the quote reflects it.
The 2023 Ashford Park home we sampled has a two-car garage on a 0.19-acre lot, and the development shares a community pool. A slab that new usually has little staining to grind out, which keeps prep short. Mention your closing date at the estimate so Nick knows how old the slab is.
The Oakmont phases share community pools run with an HOA, though one grandfathered Oakmont Estates 2 lot lists its membership as voluntary. Corinthian Oaks has no HOA, according to its listing. If your HOA reviews visible work such as a patio or porch, we can provide product and color information for the application.
Reliable local support
Corinth is about 37 minutes from our Garland shop outside rush hour. Daytime traffic takes longer. We confirm your address and current appointment options rather than promising an unverified arrival or lead time.
Nick sees your Corinth concrete in person. Size, age, stains, existing coatings and daily use shape the recommendation, and your written quote explains the preparation needed.
Qualifying residential flake systems include a 15-year written warranty. Ask Nick to explain coverage and exclusions for the specific surfaces on your quote; do not assume every outdoor or commercial system carries the same terms.
Nick’s Garland-based company handles your estimate, installation planning and project questions. Discuss all the areas you want evaluated at the same free visit, with clear recommendations and no pressure to buy.
Service coverage
Our Garland-based team also serves these nearby DFW communities — bringing the same one-day installation standard to homes and businesses around Corinth.
Questions? Call us
214-550-9809Nearby service areas
Helpful local answers
Before, in most cases, because a Corinth warehouse floor coated ahead of racking stays in one piece. Drilling anchors through finished epoxy cuts the film at every upright, and coating around installed bases takes longer and leaves more edges to wear. With an empty slab, the crew can lay epoxy wall to wall in the warehouse area. If your racking date is set, share it at (214) 550-9809.
A new slab has to cure for a minimum period before epoxy goes on, and that figure is still being confirmed. For a Corinth building completed in spring 2026, we check the pour dates and the concrete itself at the site walk before holding a coating date. If the floor needs more time, you hear that up front rather than after the epoxy fails. Call (214) 550- 9809 with your completion date.
A new Corinth warehouse floor is quoted after a no-charge visit, and with so little damage to fix, its square footage drives most of the epoxy price. With little damage to repair, the other variables are the topcoat for forklift traffic, slip texture, aisle striping and how many days the job runs. Coating before racking keeps it simpler; working around installed racking adds labor. Our office line, (214) 550-9809, sets up the visit.
A Corinth warehouse floor in the six-figure square-foot range is a multi-day epoxy job, and your written schedule gives the count before work starts. Prep, epoxy and topcoat each need the area clear, and cure time follows before racking crews walk on it. Because the building is empty, there is no business to work around, only the racking date. Plan the days with us at (214) 550-9809.
We do, and every Corinth address inside city limits is in range for epoxy, whether it sits on N Corinth St, along the I-35E frontage, on Corinth Pkwy or near Oakmont Country Club. Measured late at night, the drive from our shop was about 37 minutes for 34.9 miles; by day it stretches. Two ZIPs here also carry Denton addresses, which is why we confirm the city, not only the ZIP. Read us yours at (214) 550-9809.
Have the racking layout and install date, even in draft, because the epoxy in a Corinth warehouse is scheduled around them. Know where the office build-out stops and what flooring it gets, and when the slab was poured. If you know what forklifts or pallet equipment will run, mention it, since the topcoat is matched to that traffic. With those, the quote comes back firm. Start by calling (214) 550-9809.
Probably not: in a Corinth house we install polyurea flake, and epoxy is saved for business floors like that new warehouse. Polyurea gives with the slab better, by Nick's estimate around four times, and the polyaspartic clear layer on top keeps from yellowing in sun. Garages here range from 1980s slabs around Oakmont to new ones in Ashford Park, and Nick looks at either kind for free. The Corinth garage page has the details; (214) 550-9809 reaches him.
Tell us the racking date, and we will plan a coating that cures in time.